<p><p><strong>References:<br></strong><em>Adams, et al. (2011)<br>Berg, et al. (2009)<br>Morrison, et al. (2006b)<br>Simac, et al. (1993)<br>Tanyu, et al. (2008)</em></p><p><strong>Method Summary</strong></p><p>The contractor field superintendent and crew chiefs, and the owner's field representatives, should carefully read the specification requirements for the specific type of system to be constructed, with special attention given to material handling and storage, the construction sequence, corrosion protection requirements for metallic reinforcement and UV protection for geosynthetics, special placement requirements to reduce construction damage of reinforcement, soil compaction restrictions, details for drainage requirements and utility construction, and construction of the outward slope. Materials to be inspected include precast concrete elements, reinforcing elements, facing joint material, and reinforced backfill.</p><p><strong>Accuracy and Precision</strong></p><p>The accuracy and precision with which the plans and specifications are reviewed is dependent upon the responsible QC/QA parties. Attention to detail in this stage of construction will greatly help to reduce the potential for future problems.</p><p><strong>Adequacy of Coverage</strong></p><p>All items addressed should be accounted for when reviewing the plans and specifications. Additional steps may need to be added depending on specific project requirements or restraints.</p><p><strong>Implementation Requirements</strong></p><p>The contractor and the owner or owner’s field representative needs to ensure that all steps are implemented.</p><p><strong>General Comments </strong></p><p>Material inspections help to ensure that the correct materials are being used where needed and help with the reliability of the contractor by minimizing possibilities for error.</p></p>